Company profile CMT
There is not enough data for Core Molding Technologies -core molding technologies -stock to provide analysis
There is not enough data for Core Molding Technologies -core molding technologies -stock to provide correlation calculation
There is not enough data for Core Molding Technologies -core molding technologies -stock to provide analysis
There is not enough data for molding thermoplastic products to provide analysis
There is not enough data for molding thermoplastic products to provide correlation calculation
There is not enough data for molding thermoplastic products to provide analysis
After 38 days of this quarter the interest is at 81.0. Based on that we can calculate that during remaining 53 days it will total up to 194.0. resin transfer molding expected interest is significantly higher compared to same quarter last year (+128.2%) but similar to previous quarter.
| Year | Q1 | Q2 | Q3 | Q4 |
|---|---|---|---|---|
| 2019 | 168 | 302 79.8% QoQ | 71 -76.5% QoQ | 102 43.7% QoQ |
| 2020 | 86 -48.8% YoY -15.7% QoQ | 99 -67.2% YoY 15.1% QoQ | 79 11.3% YoY -20.2% QoQ | 170 66.7% YoY 115.2% QoQ |
| 2021 | 76 -11.6% YoY -55.3% QoQ | 179 80.8% YoY 135.5% QoQ | 26 -67.1% YoY -85.5% QoQ | 43 -74.7% YoY 65.4% QoQ |
| 2022 | 32 -57.9% YoY -25.6% QoQ | 144 -19.6% YoY 350.0% QoQ | 154 492.3% YoY 6.9% QoQ | 157 265.1% YoY 1.9% QoQ |
| 2023 | 85 165.6% YoY -45.9% QoQ | 175 21.5% YoY 105.9% QoQ | 104 -32.5% YoY -40.6% QoQ | 189 20.4% YoY 81.7% QoQ |
| 2024 | 81 -4.7% YoY -57.1% QoQ | - | - | - |
The average 5 years interest of resin transfer molding was 9.7 per week. The last year interest of resin transfer molding compared to the last 5 years has changed by 21.75%. This is something to be checked. The last year interest is comparable to 5 years ago. It has changed only by -9.43%.
After 38 days of this quarter the interest is at 68.0. Based on that we can calculate that during remaining 53 days it will total up to 163.0. liquid molding expected interest is significantly lower compared to previous quarter (-54.0%) and same quarter last year (-52.6%).
| Year | Q1 | Q2 | Q3 | Q4 |
|---|---|---|---|---|
| 2019 | 205 | 296 44.4% QoQ | 252 -14.9% QoQ | 258 2.4% QoQ |
| 2020 | 224 9.3% YoY -13.2% QoQ | 169 -42.9% YoY -24.6% QoQ | 321 27.4% YoY 89.9% QoQ | 229 -11.2% YoY -28.7% QoQ |
| 2021 | 253 12.9% YoY 10.5% QoQ | 440 160.4% YoY 73.9% QoQ | 437 36.1% YoY -0.7% QoQ | 338 47.6% YoY -22.7% QoQ |
| 2022 | 282 11.5% YoY -16.6% QoQ | 316 -28.2% YoY 12.1% QoQ | 352 -19.5% YoY 11.4% QoQ | 320 -5.3% YoY -9.1% QoQ |
| 2023 | 344 22.0% YoY 7.5% QoQ | 223 -29.4% YoY -35.2% QoQ | 320 -9.1% YoY 43.5% QoQ | 354 10.6% YoY 10.6% QoQ |
| 2024 | 68 -80.2% YoY -80.8% QoQ | - | - | - |
The average 5 years interest of liquid molding was 23.08 per week. The last year interest of liquid molding compared to the last 5 years has changed by -1.52%. The interest for liquid molding is seasonal. The last year interest is comparable to 5 years ago. It has changed only by 7.47%.
After 38 days of this quarter the interest is at 185.0. Based on that we can calculate that during remaining 53 days it will total up to 443.0. That appears to be equal to previous quarter and same quarter last year.
| Year | Q1 | Q2 | Q3 | Q4 |
|---|---|---|---|---|
| 2019 | 215 | 279 29.8% QoQ | 352 26.2% QoQ | 271 -23.0% QoQ |
| 2020 | 471 119.1% YoY 73.8% QoQ | 351 25.8% YoY -25.5% QoQ | 309 -12.2% YoY -12.0% QoQ | 350 29.2% YoY 13.3% QoQ |
| 2021 | 325 -31.0% YoY -7.1% QoQ | 485 38.2% YoY 49.2% QoQ | 507 64.1% YoY 4.5% QoQ | 417 19.1% YoY -17.8% QoQ |
| 2022 | 267 -17.8% YoY -36.0% QoQ | 326 -32.8% YoY 22.1% QoQ | 283 -44.2% YoY -13.2% QoQ | 434 4.1% YoY 53.4% QoQ |
| 2023 | 343 28.5% YoY -21.0% QoQ | 279 -14.4% YoY -18.7% QoQ | 325 14.8% YoY 16.5% QoQ | 341 -21.4% YoY 4.9% QoQ |
| 2024 | 185 -46.1% YoY -45.7% QoQ | - | - | - |
The average 5 years interest of compression molding was 27.37 per week. The last year interest of compression molding compared to the last 5 years has changed by -2.48%. The interest for compression molding is seasonal. The last year interest is comparable to 5 years ago. It has changed only by 5.29%.
After 38 days of this quarter the interest is at 69.0. Based on that we can calculate that during remaining 53 days it will total up to 165.0. dicyclopentadiene expected interest is significantly lower compared to previous quarter (-50.6%) and same quarter last year (-62.8%).
| Year | Q1 | Q2 | Q3 | Q4 |
|---|---|---|---|---|
| 2019 | 318 | 298 -6.3% QoQ | 129 -56.7% QoQ | 250 93.8% QoQ |
| 2020 | 539 69.5% YoY 115.6% QoQ | 224 -24.8% YoY -58.4% QoQ | 203 57.4% YoY -9.4% QoQ | 322 28.8% YoY 58.6% QoQ |
| 2021 | 242 -55.1% YoY -24.8% QoQ | 120 -46.4% YoY -50.4% QoQ | 232 14.3% YoY 93.3% QoQ | 360 11.8% YoY 55.2% QoQ |
| 2022 | 232 -4.1% YoY -35.6% QoQ | 247 105.8% YoY 6.5% QoQ | 66 -71.6% YoY -73.3% QoQ | 205 -43.1% YoY 210.6% QoQ |
| 2023 | 444 91.4% YoY 116.6% QoQ | 149 -39.7% YoY -66.4% QoQ | 103 56.1% YoY -30.9% QoQ | 334 62.9% YoY 224.3% QoQ |
| 2024 | 69 -84.5% YoY -79.3% QoQ | - | - | - |
The average 5 years interest of dicyclopentadiene was 19.56 per week. The last year interest of dicyclopentadiene compared to the last 5 years has changed by -8.74%. This is something to be checked. The last year interest is quite lower compared to 5 years ago. It has decreased by -26.78%.
There is not enough data for spray-up and hand-lay-up to provide analysis
There is not enough data for spray-up and hand-lay-up to provide correlation calculation
There is not enough data for spray-up and hand-lay-up to provide analysis
There is not enough data for long fiber thermoplastics to provide analysis
There is not enough data for long fiber thermoplastics to provide correlation calculation
There is not enough data for long fiber thermoplastics to provide analysis
There is not enough data for structural foam injection molding to provide analysis
There is not enough data for structural foam injection molding to provide correlation calculation
There is not enough data for structural foam injection molding to provide analysis
There is not enough data for structural web injection molding to provide analysis
There is not enough data for structural web injection molding to provide correlation calculation
There is not enough data for structural web injection molding to provide analysis